Ozone Formulas and Conversions

Accurate ozone calculations are essential for proper system design, performance verification, and safe operation. This technical reference compiles commonly used ozone output and concentration conversions.

On this page

Share This Article

Fundamental Properties of Ozone

Understanding the nature of the “activated oxygen” molecule is the first step in any ozone application.
Chemical Formula O3
Molecular Weight 48 g/mol
Gas Density at STP 2.14 kg/m3
Solubility in Water ~13x higher than Oxygen
Oxidation Potential 2.07 V

Common Ozone Measurement Units

Ozone is measured differently depending on whether it is in a gas or liquid phase.

Concentration Units (Gas & Liquid)

mg/L Milligrams per Liter Used for dissolved ozone in water.
g/m3 Grams per Cubic Meter The standard for measuring ozone concentration in a gas stream.
PPM Parts Per Million
  • 1 ppm is approximately 1 mg/L.
  • In air: 1 ppm by volume is 2.14 mg/m3.
% Weight Common for generator specifications.

  • 1% by weight in Air = 12.8 g/m3
  • 1% by weight in Oxygen = 14.3 g/m3

Flow Rate Units

LPM Liters Per Minute Standard metric for gas flow (oxygen or air).
SCFH Standard Cubic Feet per Hour Standard imperial unit for gas flow.
m3/hr Cubic Meters per Hour Used for high-volume gas or water flow.
GPM Gallons Per Minute Standard imperial unit for water flow.

Production & Pressure Units

g/hr Grams per Hour The standard measure of ozone generator output capacity.
lbs/day Pounds per Day Common in large-scale industrial ozone specs.
psi Pounds per Square Inch Measure of back-pressure on the system.

Key Formulas & Conversions

Ozone Generator Output

Estimates generator output based on feed gas flow and concentration
Output (g/hr) = (Flow (LPM) × 60 × Dosage (g/m3)) ÷ 1000
Capacity is expressed as mass produced per unit time. Essential for equipment sizing and comparison.
1 g/hr = 24 g/day
1 lb/day = 18.9 g/hr
1 kg/hr = 2.2046 lb/hr
1 mg/hr = 0.001 g/hr

Ozone Dosage Rate

This tells you how big your ozone generator needs to be to treat a specific flow of water at a specific target level.
Required O3 (g/hr) = (Flow (GPM) × 3.785 × 60 × Dosage (PPM)) ÷ 1000

Ozone Concentration

The conversion changes based on whether you are feeding the generator with Air or Pure Oxygen because oxygen is heavier.

Ozone Concentration in Air by Weight

100 g/m3 = 7.8% O3
1% = 12.8 g/m3 O3
 1% = 7284 ppm O3

Ozone Concentration in Air by Weight

 100 g/m3 = 6.99% O3
1% = 14.3 g/m3 O3
1% = 6520 ppm O3

Ozone Concentration in Air by Volume

1 mg/L = 1 g/m3 = 1 µg/mL = 467 ppm O3
1 ppm = 2.14 mg/m3 O3
100 pphm = 1 ppm

Ozone Concentration in Water

 1 mg/L = 1ppm = 1 g/m3 O3 (by weight)

From Units to Application

Learn how to use ozone calculators and interpret results for system sizing and verification

Discover More Pinnacle Insights

  • Blogs
    BABA and Ozone Systems: What Build America, Buy America Means for Federally Funded Water Projects
    Federal funding is accelerating investment in drinking water, wastewater, water reuse, and advanced treatment infrastructure across the United States. That funding can help utilities modernize aging facilities and implement more resilient treatment processes, but it also introduces important procurement responsibilities. The Build America, Buy America Act, commonly called BABA, establishes domestic sourcing requirements for certain products and materials incorporated into federally assisted infrastructure projects. For utilities, consulting engineers, contractors, and equipment manufacturers, BABA can directly influence equipment selection, documentation, project schedules, and procurement strategy. Ozone systems deserve careful attention because [...]