Gas-Phase Ozone Concentration Converter
This tool converts ozone concentrations between mg/m³, ppmv, and weight percent. Results are applied when interpreting analyzer readings, reviewing ozone generator specifications, and aligning gas-phase design values across different unit systems.
ppmv = mg/m³ ÷ 2.14
mg/m³ = ppmv x 2.14
Weight % = ~g/m³ ÷ 14.3
mg/m³ = ppmv x 2.14
Weight % = ~g/m³ ÷ 14.3
mg/m³
ppmv
wt%
Discover More Pinnacle Insights
- BlogsAn ozone generator can be producing the correct mass of ozone, holding its setpoint, and supplying a treatment process normally while a small leak develops somewhere outside the intended gas path. A loose instrument fitting, damaged gasket, failed sample-line connection, or off-gas handling fault can turn a process problem into an occupational exposure hazard. This is why ozone room safety cannot be reduced to placing a gas detector on a wall. The design must establish how ozone is contained, how an abnormal release is detected, what equipment changes state, how [...]




